{"id":516,"date":"2020-09-30T13:18:49","date_gmt":"2020-09-30T10:18:49","guid":{"rendered":"http:\/\/atli.com.tr\/tr\/?page_id=516"},"modified":"2024-01-24T18:39:32","modified_gmt":"2024-01-24T15:39:32","slug":"din-5685","status":"publish","type":"page","link":"https:\/\/atli.com.tr\/tr\/en\/industrial-chains\/din-5685\/","title":{"rendered":"DIN 5685"},"content":{"rendered":"

Industrial Chains<\/h3>\n<\/div>

High Strength Lifting and Sling Chains<\/u>
\n\u2013 DIN EN 818 \u2013 2 \/ GRADE 80 (G80)<\/a>
\n\u2013 GRADE 100 (G100)<\/a>
\n\u2013 DIN 5687 \/ GRADE 50 (G50)<\/a><\/p>\n

Hoist Chains<\/u>
\n\u2013 DIN 5684 \/ G50-G60-G80<\/a><\/p>\n

High Strength Mine Chains<\/u>
\n\u2013 DIN 22252<\/a><\/p>\n

Conveyor Chains<\/u>
\n\u2013 DIN 764<\/a>
\n\u2013 DIN 762<\/a><\/p>\n

Short Link Calibrated Chains<\/u>
\n\u2013 DIN 766<\/a><\/p>\n

Non-Calibrated Chains<\/u>
\n\u2013 DIN 5685<\/strong><\/em>
\n\u2013 DIN 763<\/a><\/p>\n

Use-Care-Inspection<\/strong><\/span><\/a><\/p>\n

Marine Chains<\/strong><\/a>
\nSnow \/ Tire Chains<\/strong><\/a><\/p>\n<\/div><\/div><\/div>

DIN 5685 <\/b>chains<\/b>, are non-tested and non-calibrated chains.<\/p>\n<\/div><\/div><\/div><\/div>

STRAIGHT LINK (G)
\n<\/strong><\/h6>\n

\"\"<\/p>\n

Marking of a round-steel chain with straight links (G), diameter d=4 mm and pitch t=19 mm : CHAIN G 4×19 DIN 5685<\/p>\n

TWISTED LINK (X)<\/h6>\n

\"\"
\n-With the chains form X the measures t and b become slightly smaller by twisting which makes the weight of twist link chains by about %6 higher.
\n-The transformation limit corresponds to the hardness 80 N\/mm2. If it is transgressed one must expect permanent transformation contraction narrowing of chain links.
\n-The stated strain loads represent only calculated values.<\/p>\n<\/div>

DIMENSIONS AND WEIGHTS<\/b><\/p>\n<\/div>

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
d<\/span><\/center><\/td>\n
Pitch<\/span><\/center><\/td>\n
Width<\/span><\/center><\/td>\n
Strain load<\/span><\/center><\/td>\n
Form G Weight<\/span><\/center><\/td>\n
Former marking customary in<\/span><\/center><\/td>\n<\/tr>\n
Nominal diameter<\/span><\/center><\/td>\n
allowable tolerance<\/span><\/center><\/td>\n
t<\/span><\/center><\/td>\n
allowable tolerance<\/span><\/center><\/td>\n
b1 min.<\/span><\/center><\/td>\n
kN<\/span><\/center><\/td>\n
Kg \/ 100m<\/span><\/center><\/td>\n<\/tr>\n
2<\/center><\/td>\n
\u00b1 0,1<\/center><\/td>\n
12<\/center><\/td>\n
\u00b1 0,6<\/center><\/td>\n
3,6<\/center><\/td>\n
0,2<\/center><\/td>\n
7<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
22<\/center><\/td>\n
\u00b1 1,1<\/center><\/td>\n
6<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
2,5<\/center><\/td>\n
\u00b1 0,12<\/center><\/td>\n
14<\/center><\/td>\n
\u00b1 0,7<\/center><\/td>\n
4,5<\/center><\/td>\n
0,32<\/center><\/td>\n
11<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
24<\/center><\/td>\n
\u00b1 1,2<\/center><\/td>\n
10<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
3<\/center><\/td>\n
\u00b1 0,15<\/center><\/td>\n
16<\/center><\/td>\n
\u00b1 0,8<\/center><\/td>\n
5,4<\/center><\/td>\n
0,45<\/center><\/td>\n
16,5<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
26<\/center><\/td>\n
\u00b1 1,3<\/center><\/td>\n
15<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
3,5<\/center><\/td>\n
\u00b1 0,2<\/center><\/td>\n
18<\/center><\/td>\n
\u00b1 0,9<\/center><\/td>\n
6,3<\/center><\/td>\n
0,63<\/center><\/td>\n
22,4<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
28<\/center><\/td>\n
\u00b1 1,4<\/center><\/td>\n
20<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
4<\/center><\/td>\n
\u00b1 0,2<\/center><\/td>\n
19<\/center><\/td>\n
\u00b1 1<\/center><\/td>\n
7,2<\/center><\/td>\n
0,8<\/center><\/td>\n
30<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
32<\/center><\/td>\n
\u00b1 1,6<\/center><\/td>\n
27<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
4,5<\/td>\n\u00b1 0,23<\/td>\n
20<\/center><\/td>\n
\u00b1 1<\/center><\/td>\n
8,1<\/td>\n1<\/td>\n
39,5<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
34<\/center><\/td>\n
\u00b1 1,7<\/center><\/td>\n
35<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
5<\/td>\n\u00b1 0,25<\/td>\n
21<\/center><\/td>\n
\u00b1 1,1<\/center><\/td>\n
9<\/td>\n1,25<\/td>\n
50<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
35<\/center><\/td>\n
\u00b1 1,8<\/center><\/td>\n
43<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
6<\/td>\n\u00b1 0,3<\/td>\n
24<\/center><\/td>\n
\u00b1 1,2<\/center><\/td>\n
10,8<\/td>\n1,6<\/td>\n
73<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
42<\/center><\/td>\n
\u00b1 2,1<\/center><\/td>\n
63<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
7<\/td>\n\u00b1 0,35<\/td>\n
28<\/center><\/td>\n
\u00b1 1,4<\/center><\/td>\n
12,6<\/td>\n2,5<\/td>\n
100<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
49<\/center><\/td>\n
\u00b1 2,5<\/center><\/td>\n
86<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
8<\/td>\n\u00b1 0,4<\/td>\n
32<\/center><\/td>\n
\u00b1 1,6<\/center><\/td>\n
14,4<\/td>\n3,2<\/td>\n
130<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
52<\/center><\/td>\n
\u00b1 2,6<\/center><\/td>\n
110<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
10<\/td>\n\u00b1 0,5<\/td>\n
40<\/center><\/td>\n
\u00b1 2<\/center><\/td>\n
18<\/td>\n5<\/td>\n
205<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
65<\/center><\/td>\n
\u00b1 2,5<\/center><\/td>\n
175<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
12<\/td>\n\u00b1 0,6<\/td>\n
48<\/center><\/td>\n
\u00b1 2,4<\/center><\/td>\n
21,6<\/td>\n7,1<\/td>\n
290<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
78<\/center><\/td>\n
\u00b1 3,9<\/center><\/td>\n
255<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
13<\/td>\n\u00b1 0,65<\/td>\n
52<\/center><\/td>\n
\u00b1 2,6<\/center><\/td>\n
23,4<\/td>\n8<\/td>\n
345<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
82<\/center><\/td>\n
\u00b1 4,1<\/center><\/td>\n
295<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div><\/div><\/div><\/div><\/div>

DIN 5685 <\/b>chains<\/b>, are non-tested and non-calibrated chains.<\/p>\n<\/div><\/div><\/div><\/div>

STRAIGHT LINK (G)
\n<\/strong><\/h6>\n

\"\"<\/p>\n

Marking of a round-steel chain with straight links (G), diameter d=4 mm and pitch t=19 mm : CHAIN G 4×19 DIN 5685<\/p>\n

TWISTED LINK (X)<\/h6>\n

\"\"
\n-With the chains form X the measures t and b become slightly smaller by twisting which makes the weight of twist link chains by about %6 higher.
\n-The transformation limit corresponds to the hardness 80 N\/mm2. If it is transgressed one must expect permanent transformation contraction narrowing of chain links.
\n-The stated strain loads represent only calculated values.<\/p>\n<\/div>

DIMENSIONS AND WEIGHTS<\/b><\/p>\n<\/div>

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
d<\/span><\/center><\/td>\n
Pitch<\/span><\/center><\/td>\n
Width<\/span><\/center><\/td>\n
Strain load<\/span><\/center><\/td>\n
Form G Weight<\/span><\/center><\/td>\n
Former marking customary in<\/span><\/center><\/td>\n<\/tr>\n
Nominal diameter<\/span><\/center><\/td>\n
allowable tolerance<\/span><\/center><\/td>\n
t<\/span><\/center><\/td>\n
allowable tolerance<\/span><\/center><\/td>\n
b1 min.<\/span><\/center><\/td>\n
kN<\/span><\/center><\/td>\n
Kg \/ 100m<\/span><\/center><\/td>\n<\/tr>\n
2<\/center><\/td>\n
\u00b1 0,1<\/center><\/td>\n
12<\/center><\/td>\n
\u00b1 0,6<\/center><\/td>\n
3,6<\/center><\/td>\n
0,2<\/center><\/td>\n
7<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
22<\/center><\/td>\n
\u00b1 1,1<\/center><\/td>\n
6<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
2,5<\/center><\/td>\n
\u00b1 0,12<\/center><\/td>\n
14<\/center><\/td>\n
\u00b1 0,7<\/center><\/td>\n
4,5<\/center><\/td>\n
0,32<\/center><\/td>\n
11<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
24<\/center><\/td>\n
\u00b1 1,2<\/center><\/td>\n
10<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
3<\/center><\/td>\n
\u00b1 0,15<\/center><\/td>\n
16<\/center><\/td>\n
\u00b1 0,8<\/center><\/td>\n
5,4<\/center><\/td>\n
0,45<\/center><\/td>\n
16,5<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
26<\/center><\/td>\n
\u00b1 1,3<\/center><\/td>\n
15<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
3,5<\/center><\/td>\n
\u00b1 0,2<\/center><\/td>\n
18<\/center><\/td>\n
\u00b1 0,9<\/center><\/td>\n
6,3<\/center><\/td>\n
0,63<\/center><\/td>\n
22,4<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
28<\/center><\/td>\n
\u00b1 1,4<\/center><\/td>\n
20<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
4<\/center><\/td>\n
\u00b1 0,2<\/center><\/td>\n
19<\/center><\/td>\n
\u00b1 1<\/center><\/td>\n
7,2<\/center><\/td>\n
0,8<\/center><\/td>\n
30<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
32<\/center><\/td>\n
\u00b1 1,6<\/center><\/td>\n
27<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
4,5<\/td>\n\u00b1 0,23<\/td>\n
20<\/center><\/td>\n
\u00b1 1<\/center><\/td>\n
8,1<\/td>\n1<\/td>\n
39,5<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
34<\/center><\/td>\n
\u00b1 1,7<\/center><\/td>\n
35<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
5<\/td>\n\u00b1 0,25<\/td>\n
21<\/center><\/td>\n
\u00b1 1,1<\/center><\/td>\n
9<\/td>\n1,25<\/td>\n
50<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
35<\/center><\/td>\n
\u00b1 1,8<\/center><\/td>\n
43<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
6<\/td>\n\u00b1 0,3<\/td>\n
24<\/center><\/td>\n
\u00b1 1,2<\/center><\/td>\n
10,8<\/td>\n1,6<\/td>\n
73<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
42<\/center><\/td>\n
\u00b1 2,1<\/center><\/td>\n
63<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
7<\/td>\n\u00b1 0,35<\/td>\n
28<\/center><\/td>\n
\u00b1 1,4<\/center><\/td>\n
12,6<\/td>\n2,5<\/td>\n
100<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
49<\/center><\/td>\n
\u00b1 2,5<\/center><\/td>\n
86<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
8<\/td>\n\u00b1 0,4<\/td>\n
32<\/center><\/td>\n
\u00b1 1,6<\/center><\/td>\n
14,4<\/td>\n3,2<\/td>\n
130<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
52<\/center><\/td>\n
\u00b1 2,6<\/center><\/td>\n
110<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
10<\/td>\n\u00b1 0,5<\/td>\n
40<\/center><\/td>\n
\u00b1 2<\/center><\/td>\n
18<\/td>\n5<\/td>\n
205<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
65<\/center><\/td>\n
\u00b1 2,5<\/center><\/td>\n
175<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
12<\/td>\n\u00b1 0,6<\/td>\n
48<\/center><\/td>\n
\u00b1 2,4<\/center><\/td>\n
21,6<\/td>\n7,1<\/td>\n
290<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
78<\/center><\/td>\n
\u00b1 3,9<\/center><\/td>\n
255<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n
13<\/td>\n\u00b1 0,65<\/td>\n
52<\/center><\/td>\n
\u00b1 2,6<\/center><\/td>\n
23,4<\/td>\n8<\/td>\n
345<\/center><\/td>\n
A Short<\/center><\/td>\n<\/tr>\n
82<\/center><\/td>\n
\u00b1 4,1<\/center><\/td>\n
295<\/center><\/td>\n
C Long<\/center><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div><\/div><\/div>

Industrial Chains<\/h3>\n<\/div>

High Strength Lifting and Sling Chains<\/u>
\n\u2013 DIN EN 818 \u2013 2 \/ GRADE 80 (G80)<\/a>
\n\u2013 GRADE 100 (G100)<\/a>
\n\u2013 DIN 5687 \/ GRADE 50 (G50)<\/a><\/p>\n

Hoist Chains<\/u>
\n\u2013 DIN 5684 \/ G50-G60-G80<\/a><\/p>\n

High Strength Mine Chains<\/u>
\n\u2013 DIN 22252<\/a><\/p>\n

Conveyor Chains<\/u>
\n\u2013 DIN 764<\/a>
\n\u2013 DIN 762<\/a><\/p>\n

Short Link Calibrated Chains<\/u>
\n\u2013 DIN 766<\/a><\/p>\n

Non-Calibrated Chains<\/u>
\n\u2013 DIN 5685<\/strong><\/em>
\n\u2013 DIN 763<\/a><\/p>\n

Use-Care-Inspection<\/strong><\/span><\/a><\/p>\n

Marine Chains<\/strong><\/a>
\nSnow \/ Tire Chains<\/strong><\/a><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"parent":181,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-516","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/atli.com.tr\/tr\/wp-json\/wp\/v2\/pages\/516","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/atli.com.tr\/tr\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/atli.com.tr\/tr\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/atli.com.tr\/tr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/atli.com.tr\/tr\/wp-json\/wp\/v2\/comments?post=516"}],"version-history":[{"count":13,"href":"https:\/\/atli.com.tr\/tr\/wp-json\/wp\/v2\/pages\/516\/revisions"}],"predecessor-version":[{"id":1120,"href":"https:\/\/atli.com.tr\/tr\/wp-json\/wp\/v2\/pages\/516\/revisions\/1120"}],"up":[{"embeddable":true,"href":"https:\/\/atli.com.tr\/tr\/wp-json\/wp\/v2\/pages\/181"}],"wp:attachment":[{"href":"https:\/\/atli.com.tr\/tr\/wp-json\/wp\/v2\/media?parent=516"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}